Gate Opener Sliding Set 230VAC RAPID-24-DIY

Sliding Gate Opener RAPID-24-DIY

For those seeking a faster and more efficient solution for their sliding gates, the RAPID-24-DIY is the answer. Designed to reduce gate opening times by up to 50%, this high-speed gate opener is perfect for driveways on busy roads where every second matters. A traditional gate opener typically handles 10-12 meters in 60 seconds, but the RAPID-24-DIY can open up to 20 meters in the same time.
Your 4m gate can fully open in as little as 12-13 seconds. This makes it not only faster but also safer and more convenient for daily use.

An important element of this gate automation is the Hall sensor, which determines the place where the gate stops when opening and closing. Thus, there is no need to install classic limiters on the gate.

What sets the RAPID-24-DIY apart isn't just its speed – it's also a well-crafted, durable system with a smart control unit. The control board offers full customization of settings and features, allowing you to tailor the operation to your specific needs. Offering both outstanding performance and value, this system is the perfect upgrade for anyone seeking a high-performance sliding gate opener suitable also for DIY installation.

Below a list of the features avaialble:

- Auto close
- Pedestrian mode
- Collision Sensing: Electronic
- Gate speed: Up to 22m/min
- Gate Activator terminals
- Terminal f. Push button & keypad
- Manual Override: Lockable with Key Release
- Backup battery (optional)
- Wifi terminals (optional)
- Safety beam terminals


Technical Data:
Power supply: 230VAC to Stepdown transformer in separate enclosure = 24VAC
Gates up to 800kg and 8m length on level ground.
Motor output: ca. 300W
Gate speed ca.: 21m min (+/- 10%)
Auxiliary power output: 24VDC 3W max.
Weight (no battery): ca. 9.0kg
Dimensions: H: 288, L:300, W:202mm
Working temperature: -10 - +55°C
Remote controls: 433.92 MHz
Max remote controls: 25+
Flashing beacon output
Pedestrian mode

Operate the gate opener:
Remote control (2 included)
Push button (optional)
Keypad (wireless or wired) (optional)
IR safety sensors (optional)
Gate Activator


Included:
• 1x Gate opener motor unit RAPID-24-DIY
• Brackets, Fittings & Hardware
• 1x Key for override lever
• 2x Remote control
• 4x 1m Nylon Racks
• Manual
• 1x Enclosure with step-down transformer, 1n cable +plug for power point.

Optional Upgrade:
• 1x Backup battery

Model XF-24-DIY
Power supply AC220-240V/50Hz
Motor DC24V 300W
Max. speed 18m-22m/60sec.
MAX. Output Torque 18N.m
Gate Weight ≤800kg
Degree of Protection IP44
Duty Cycle S2, 20%
Working Temperature -10℃~+60℃

Low Price Guarantee!

Warranty:
12 months RTB
Consumer Guarantees Act applies

Photos are general examples and indicative only / 

TURTLE DIRECT© TURTLE Gate Automation©