High Speed Gate Opener Set RAPID-24-STD

Sliding Gate Opener RAPID-24-STD / 230VAC

For those seeking a faster and more efficient solution for their sliding gates, the RAPID-24-STD is the answer. Designed to reduce gate opening times by up to 50%, this high-speed gate opener is perfect for driveways on busy roads where every second matters. A traditional gate opener typically handles 10-12 meters in 60 seconds, but the RAPID-24-STD can open up to 22 meters in the same time.

This version of the Rapid requires 240VAC at the gate.  If there is no AC power at the gate but you have a powerpoint within 50m, click on the link to get to another version of this opener (Link coming soon).

A 4m gate can fully open in as little as 12-13 seconds if you use RAPID. This makes it not only faster but also safer and more convenient for daily use.

An important element of this gate opener system is the Hall sensor, which determines the place where the gate stops when opening and closing. Thus, there is no need to install classic limiters on the gate.

What sets the RAPID-24-STD apart isn't just its speed – it's also a well-crafted, durable system with a smart control unit. The control board offers full customization of settings and features, allowing you to tailor the operation to your specific needs. Offering both outstanding performance and value, this system is the perfect upgrade for anyone seeking a high-performance sliding gate opener suitable also for DIY installation.

Below a list of the features avaialble:

- Auto close
- Pedestrian mode
- Collision Sensing: Electronic
- Gate speed: Up to 22m/min 
- Gate Activator terminals
- Terminal f. Push button & keypad
- Manual Override: Lockable with Key Release
- Backup battery (optional)
- Wifi terminals (optional)
- Safety beam terminals


Technical Data:
Power supply: 230VAC to Stepdown transformer = 24VAC
Gates up to 800kg and 8m length on level ground.
Motor output: ca. 300W
Gate speed ca.: 21m min (+/- 10%)
Auxiliary power output: 24VDC 3W max.
Weight (no battery): ca. 9.0kg
Dimensions: H: 288, L:300, W:202mm
Working temperature: -10 - +55°C
Remote controls: 433.92 MHz
Max remote controls: 25+
Flashing beacon output
Pedestrian mode

Operate the gate opener:
Remote control (2 included)
Push button (optional)
Keypad (wireless or wired) (optional)
IR safety sensors (optional)
Gate Activator (optional)


Included:
• 1x Gate opener motor unit RAPID-24-STD
• Brackets, Fittings & Hardware
• 1x Key for override lever
• 2x Remote control
• 4x 1m Nylon Racks
• Manual
•
Optional Upgrade:
• 1x Enclosure with step down transformer to plug in at garage.
• 1x Backup battery


Low Price Guarantee!

Warranty:
12 months RTB
Consumer Guarantees Act applies

Photos are general examples and indicative only / 

TURTLE DIRECT© TURTLE Gate Automation©