Sliding Gate Opener DIY Installation

Sliding Gate Opener DIY
Extras & Accessories


Sliding Gate Opener DIY

This is an AC-powered set with a 12V motor. You can plug the power box in at your garage and transform mains to 15VAC allowing you to wire yourself (low voltage). You won’t have to dig the cable 80 cm deep in the ground like a 230V/AC cable. This sliding gate opener provides good starting torque making it ideal for domestic applications. Constructed with an aluminium alloy chassis, it's corrosion resistant and solid enough for heavy use. The motor supports gates up to 500kg and 6m length

Sliding gate operator:
1. fully-automatic
2. 12V motor with 230V AC power supply and transformer
3. weather-proof
4). Electronic soft-start
5). Automatic return if high resistance met

Voltage: 12V
Motor making: die casting  aluminum 
Manual Release: yes
Remote distance: > 30m - 50m
Product weight, :ca. 8.5kg
Max, weight of gate: 500kg max. length 6m
This is a 12VAC system and you are allowed to wire it DIY not like a 230VAC system that has to be wired by a Registered Electrician.

For domestic use only, not for retirement villages, blocks etc., all data ref. to gates installed on even flat surface.  

Auto closing: YES
Safety Photocell socket: YES
Alarm light socket: YES
Keypad socket: YES
Pedestrian mode opening: YES

12 month RTB
Consumer Guarantees Act applies

No trenching and no electrician needed. You are allowed to wire low power systems yourself and this can save you a lot of money.

Comes with detailed installation instruction - Gate hardware installation kits and more accessories are available in or web shop. 

  Technical Data:

  • Power supply: Solar 12VDC.
  • Gates up to 450kg and 5m length on flat surface. 
  • Motor output: ca. 80W 
  • Gate speed ca.: 12m min
  • Auxiliary power output: 12VDC 3W max.
  • Weight (no battery): ca. 8.5kg 
  • Dimensions: H: 280, L:300, W:210mm
  • Working temperature: -10 - +55°C
  • Remote controls: 433.92 MHz Rolling Code 
  • Max remote controls: 25+
  • Flashing beacon output

 Operate the gate opener:

  • Remote control (2 included)
  • Push button (optional)
  • Keypad (wireless or wired) (optional)
  • IR safety sensors (optional)
  • more options available ...


  • 1x Gate opener motor
  • 1x Enclosure with plug in transformer coil 230VAC to ca. 15VAC
  • 4x 1m Steel Rack / Nylon is optional 
  • 2x Remote control 

Please note: Cables are not included.

12 months RTB
Consumer Guarantees Act applies


TURTLE DIRECT©  Gate Automation