Turtle Sliding Gate Opener 230VAC Flood Proof / heavy duty SGO-CR-230AC-M0+
Listing for Motor plus 2 remotes only! No racks included!
Durable, Weatherproof & Flood Proof Device
Water tight flood proof motor, all mechanics & limit switches are completely concealed making it completely weather, dust & flood proof. For gates up to 1200kg.
- Power supply: 230 VAC 50-60Hz 1100W max.
- Gates up to 1200kg
- Motor output: 230 V ac 550 W
- Auxiliary power output: 24 V a/c 3 W max.
- Stop limit / low voltage commands: 24 V cc
- Flood proof
- Working temperature: -10 - 55 °C
- Remote controls: 12-18 Bit or Rolling Code
- Max stored remote controls: 215 (CODE + CODE PED)
- Flashing beacon output
Operate the gate opener:
- Remote control (2 included)
- Push button (optional)
- Keypad (wireless or wired) (optional)
- IR safety beams (included)
- GSM switch (optional)
- Exit Wand (optional)
- more options available ...
The control board can close the gate automatically depending on your time settings.
Pedestrian Passage: If selected (PED CODE LED illuminated), using the pedestrian radio control to control the gate, the following operation is obtained: the first press is a command for the gate to open for 10 seconds, after 10 seconds the gate auto closes again.
IR safety beams can be installed (included)
Flashing Beacon Operation:
A beacon can be connected that will flash during gate operation.
The control unit may be connected to a timer instead of using the remote or a push button.
Example: at 8:00 a.m. the timer closes the contact and the control unit opens the gate; at 6:00 p.m. the timer opens the contact and the control unit closes the gate. Between 8:00 and 6:00 p.m. at the end of the opening phase, the control unit disables the flashing beacon, the automatic closing stage and the radio controls.
Reliability & Durability
The Turtle Heavy Duty SGO-CR-230AC 230VAC motor is a powerful unit built from reliable components consisting of all metal gears (no nylon or plastic) unlike most competitors models. The DC motor is fitted with a steel worm drive and works in conjunction with the metal transfer gearbox and metal pinion to ensure the highest durability and strength in the operation of the sliding gate.
This system is engineered to last a long life and carries a full 12 months Warranty.
This Sliding gate motor is IP57 rated meaning that it can handle temporary water immersion of up to 1 metre (3 feet) of fresh water for up to 30 minutes. This makes it the ideal choice for users wanting maximum protection to their sliding gate motor and for areas which are flood prone. The motor does not have any protruding components and is completely concealed and water tight with all mechanical components built in underneath the motor cover. Please see further information below.
Magnetic Limit switches
The motor is fitted with magnetic limit switches to ensure two things:
1. A water tight seal around the motor to stop dust, water and insects from getting into the motor as there is no open areas or protruding components such as limit switches (magnetic limit switches are built in underneath the motor cover).
2. Wear and Tear is minimized due to less mechanical parts.
Easy to use manual override with 3 keys supplied, simply unlock with the key, pull the lever and the gate will be free and can be opened manually in the case of an emergency or a power outage.
230V AC Motor with All Metal Gears (No Nylon or Plastic)
This Heavy Duty 230V AC motor is constructed of all solid metal gears. The worm drive, gearbox and pinion are all constructed of solid metal ensuring strength and durability. Please see pictures above.
This Motor can handle heavy gates up to a maximum of 1200kg. Please note: This gate motor can handle a sliding gate up to 1200kg in weight, but this weight capacity is variable and based on the width of the gate, the design (open frame, cladded, color bond sheet) and how level the ground is. All of these factors which differ in every installation must be taken into account and will determine the final capacity that this motor can handle for that particular installation.
- 1x Gate opener motor with base plate
- Screw set for motor
- 2x Remote control
- 2x. Magnetic Limit Switch
12 months RTB
Consumer Guarantees Act applies
TURTLE DIRECT© TURTLE DIRECT©
IMPORTANT: This unit needs to be installed by a registered electrician, as it requires 230v hard wiring.