TURTLE Wheel Type Swing Gate Opener

Extras & Accessories

Heavy Duty Wheel Type Swing Gate Opener GO-WLD-1-DIY

Smart design: The power applied with this kind of opener is used in a more efficient way then with most other systems. The position of the motor is ideal in relation to the pivot point (center of rotation). This system is therefore capable of handling bigger and heavier gates then usually possible with other gate openers.
Easy installation: Another advantage of this opener is how easy and quick it is installed in comparison to other systems.

The GO-BL-230-24-DIY model is AC-powered with 24V motors. You can plug it in to any grid socket and take the cable to the gate yourself without any obligation to take it underground like a 230VAC cable. This option is working for gates up to max. 30m - 50m distance from grid. Cable diameter for 30m is around 1mm2 for longer distances you have to contact an electrician to figure out what cable diameter you have to use. You are allowed to do all wiring yourself (24V = low voltage). Be aware that this option is usually only of interest for you in situations where grid is not available directly at your gate.

Important: this gate opener system should only be used on sealed underground or concrete with less than 100mm level difference.
The motor(s) come with a weather proof enclosure containing the controller and power transformer (220V AC to 24V DC)

Working Temperature:-25℃~+55℃
Power Supply:220V±10% 50Hz
Motor Voltage:24V DC
Rated Power:200W while connection wires within 30 meters, 3.5W while non-working state.
Open(Close)Speed: 10-15m/min
Remote Control Distance: 50m(In Open Area)
Ground Gap:0-100mm
Product Carton package:37cm x 27cm x 32cm
Gross Weight:11KG  (one motor)

Only suitable for a hard and reasonably even underground.

System comes with:
1x Motor with wheel (black housing) 2x motor for double gate set
1x Control box
2x Remote control
1x Set of screws
1x Manual

Some pictures are only indicative examples.