TURTLE SWING GATE OPENER - 24V DIY - GO-LO2-3DIY

Not quite sure what kind of gate opener you need or how to power it?  How to find the right Gate Opener?

The GO-LO2-3DIY model is an AC-powered 24V set. Just plug in the power box in your garage and transform power to 24VAC allowing you to wire yourself. You won't have to dig the cable 80cm deep in the ground like a 230V/AC cable. This is a  is a robust, long lasting and quiet opening and closing system for double swing gates up to 3m in length. The motor can handle medium size gates. It is a screw type actuator made of stainless steel with a cast alloy motor housing. The motor is quiet and the gear box is solid - gears are constructed of metal.

Features
• Open and close the gate by remote control and keypad
• Soft start/close
• Emergency release key in case of power failure
• Dual gate running mode
• Adjustable opening/closing interval between master and slave gate
• Stop/Reverse in case of obstruction during gate opening/closing.
• Optional photocell protection (IR safety beam not included)
• Built in adjustable auto-close (programmable)
• 12 month warranty

Specification
Input Voltage: 24V / 230V
Rotational Speed: 250RPM
Rod's Running Speed: 24V = 2.5cm/s
Rod's Max Travel: 400mm
Rod's min. time to extend fully 12sec. for 400mm
Continue running time: 5min
Max Single-leaf Length: 3M  FOR "OPEN" FARM GATES (no cladding) / 2.5m for double gates without cladding.
Max Single-leaf Weight: 200KG
Environment Temperature: -20°C~+50°C
Water Protection: IP55

Included
1x Motor Arm (2x if upgrade to double set is selected)
1x Plug in Enclosure with transformer coil
1x Enclosure with control board
2x Remote control
1x Manual

Warranty:
12 months RTB
Consumer Guarantees Act applies

TURTLE DIRECT© Turtle Automation