Safety Beam for Swing & Sliding Gates (wired / wireless)

Semi Wireless Safety Beam Sensors 12-15m range for gate opener system and other Gate Auutomation Products
Extras & Accessories
$35.00
SFT-BEAM-1
+
Exclusive Availability
Buy Now Add to My Favorites
  • FAQ

Active IR Single Beam sets - wired or semi wireless.

Wired model: $35
Safety Beam Sensors 12-15m range
Infrared beam security beam sensor.
This kind of sensors are normally used as safety beam sensors on gate and garage opening systems to stop the gate from closing on a car, person or other objects the stop is triggered as soon as the beam is broken.
The Sensors allows for N/O & N/C contacts.
Specifications
Detection technology: Infrared
Range: up to 15m
Frequency: 1.92Khz
Power: 10-24V AC/DC
Wave Length: 940mm
Input: RX 15mA, TX 30mA
Operating temperature: -20 to 70 degrees
Relay output: 1Amp max 30V
Dimension: 49.2 x 76 21mm
Please note: Range may vary according to the site environment conditions and according to the weather.

 

Wireless model: $68

Wireless Safety Beam Sensors 10-15m range
Infrared beam security beam sensor.

This sensor set differs from the standard IR beams because only the receiver part needs to be wired to the motor, while the beam transmitter on the other side of the gate is battery operated. Ergo no cables have to cross the driveway or go under the driveway. This is a huge benefit and will save you money and time, especially if you have a sealed driveway.


Specifications
Detection technology: Active pulsed Infrared
Range: 10-15m

Power: Receiver 10-24V DC / Transmitter: 2x AA battery / ca. 2 years battery live / acustic low battery indicator
Wave Length: 940mm
Operating temperature: -10 to 50 degrees
Relay output: 1Amp
Dimension: 135x54x30


Please note: Range may vary according to the site environment conditions and weather. No cables included as every situation is different

IMPORTANT: This product is only sold to owners / buyers of our gate openers.

 

Do I need IR safety beams at all?

There is no law or technical necessity to have them installed. However, we do recommend to have them installed, especially if you have kids or want to make sure the gate is not accidently closing on your car.

When should I go for the wireless model?

Upgrade to semi wireless sensors, for sealed driveways. The standard beam set will require a cable you have to get across the driveway to power the beam transmitter. This can be difficult if you have a sealed driveway. The beam transmitter of this model is battery powered (ca. 2 years battery life).